ESP8266で E-ink を表示させるために、信号解析用のロジックアナライザーが必要になりそうなので、安いものを探しました。
以前、Logic Pirate (とLogic Snifferで動作)というのを知りましたが、
Logic Pirate というオープンソースのロジックアナライザ
ハードが4500円(30ドル+送料)ほどで、もう少し安いのはないかと調査すると、ありました。世の中は本当に広いものです。
EZ-USB FX2LP CY7C68013A USB Development Board Core Board Logic Analyzer
これはaliexpress で1000円以下で売っています。ソフトウェアは、sigrok というオープンソースがあります。ということで、ポチっておきました。年末に来るといいな。
追記:EZ-USB FX2LPでアリエクを検索すると、たくさんでてきます。2021年2月時点で、537円になっていました。
追記:とても良い映像コンテンツがあったので貼っておきます。@OpenTechLabChan さんのチャンネルです。
http://sigrok.org/wiki/Main_Page
Windows はバイナリがあり、osx は brew で入れるようで、試してみましたが、インストールに失敗するようで、そのメモです。windows バイナリ版は起動し、以下のようにデモ信号を見れます。最初の一台としては十分な機能のような気がします。
sigrok を osx で動作させるため、以下を参考。
http://sigrok.org/wiki/Mac_OS_X
以下の流れですが、★でこけます。
1) $ brew tap rene-dev/sigrok
2) $ brew install python3
3) $ brew install –HEAD libserialport
★4) $ brew install –HEAD –with-libserialport libsigrok
5) $ brew install –HEAD libsigrokdecode
6) $ brew install –HEAD –with-libserialport sigrok-cli
7) $ brew install –HEAD pulseview
8) $ brew install sigrok-cli
ファームウェアは、以下のようです。
・fx2lafw open-source firmware
http://sigrok.org/wiki/Fx2lafw
Lcsoft Mini Board (CY7C68013A)
以下、こける部分です。
1) ------------------------------------------------------
HOPE:~ junkhackbrew tap rene-dev/sigrok
==> Tapping rene-dev/sigrok
Cloning into '/usr/local/Library/Taps/rene-dev/homebrew-sigrok'...
remote: Counting objects: 8, done.
remote: Compressing objects: 100% (8/8), done.
remote: Total 8 (delta 4), reused 2 (delta 0), pack-reused 0
Unpacking objects: 100% (8/8), done.
Checking connectivity... done.
Tapped 6 formulae (35 files, 144K)
HOPE:~ junkhack
・何か入れてからじゃないとだめな感じ。
8) ------------------------------------------------------
HOPE:~ junkhackbrew install sigrok-cli
Error: Formulae found in multiple taps: * homebrew/science/sigrok-cli
* rene-dev/sigrok/sigrok-cli
Please use the fully-qualified name e.g. homebrew/science/sigrok-cli to refer the formula.
HOPE:~ junkhack
・python3 はもう入ってた
2) ------------------------------------------------------
HOPE:~ junkhackbrew install python3
Warning: python3-3.4.3_2 already installed
HOPE:~ junkhack
・libserialport は入る
3) ------------------------------------------------------
HOPE:~ junkhackbrew install --HEAD libserialport
==> Installing libserialport from rene-dev/homebrew-sigrok
==> Cloning git://sigrok.org/libserialport
Cloning into '/Library/Caches/Homebrew/libserialport--git'...
remote: Counting objects: 1036, done.
remote: Compressing objects: 100% (870/870), done.
remote: Total 1036 (delta 703), reused 249 (delta 165)
Receiving objects: 100% (1036/1036), 245.95 KiB | 81.00 KiB/s, done.
Resolving deltas: 100% (703/703), done.
Checking connectivity... done.
==> Checking out branch master
==> ./autogen.sh
==> ./configure --prefix=/usr/local/Cellar/libserialport/HEAD
==> make install
/usr/local/Cellar/libserialport/HEAD: 9 files, 220K, built in 26 seconds
HOPE:~ junkhack
・ここがこける
4) ------------------------------------------------------
HOPE:~ junkhackbrew install --HEAD --with-libserialport libsigrok
==> Installing libsigrok from rene-dev/homebrew-sigrok
==> Installing dependencies for rene-dev/sigrok/libsigrok: libzip, libusb, libsigc++, glibmm, doxygen, autoconf-archive
==> Installing rene-dev/sigrok/libsigrok dependency: libzip
==> Downloading https://homebrew.bintray.com/bottles/libzip-0.11.2.mavericks.bottle.2.tar.gz
######################################################################## 100.0%
==> Pouring libzip-0.11.2.mavericks.bottle.2.tar.gz
/usr/local/Cellar/libzip/0.11.2: 81 files, 536K
==> Installing rene-dev/sigrok/libsigrok dependency: libusb
==> Downloading https://homebrew.bintray.com/bottles/libusb-1.0.19.mavericks.bottle.1.tar.gz
######################################################################## 100.0%
==> Pouring libusb-1.0.19.mavericks.bottle.1.tar.gz
/usr/local/Cellar/libusb/1.0.19: 11 files, 368K
==> Installing rene-dev/sigrok/libsigrok dependency: libsigc++
==> Downloading https://homebrew.bintray.com/bottles/libsigc++-2.4.1.mavericks.bottle.tar.gz
######################################################################## 100.0%
==> Pouring libsigc++-2.4.1.mavericks.bottle.tar.gz
/usr/local/Cellar/libsigc++/2.4.1: 679 files, 14M
==> Installing rene-dev/sigrok/libsigrok dependency: glibmm
==> Downloading https://homebrew.bintray.com/bottles/glibmm-2.44.0.mavericks.bottle.tar.gz
######################################################################## 100.0%
==> Pouring glibmm-2.44.0.mavericks.bottle.tar.gz
/usr/local/Cellar/glibmm/2.44.0: 1626 files, 42M
==> Installing rene-dev/sigrok/libsigrok dependency: doxygen
==> Downloading https://homebrew.bintray.com/bottles/doxygen-1.8.10.mavericks.bottle.tar.gz
######################################################################## 100.0%
==> Pouring doxygen-1.8.10.mavericks.bottle.tar.gz
/usr/local/Cellar/doxygen/1.8.10: 8 files, 14M
==> Installing rene-dev/sigrok/libsigrok dependency: autoconf-archive
==> Downloading https://homebrew.bintray.com/bottles/autoconf-archive-2015.02.24.mavericks.bottle.tar.gz
######################################################################## 100.0%
==> Pouring autoconf-archive-2015.02.24.mavericks.bottle.tar.gz
/usr/local/Cellar/autoconf-archive/2015.02.24: 558 files, 4.3M
==> Installing rene-dev/sigrok/libsigrok
==> Cloning git://sigrok.org/libsigrok
Cloning into '/Library/Caches/Homebrew/libsigrok--git'...
remote: Counting objects: 27468, done.
remote: Compressing objects: 100% (13210/13210), done.
remote: Total 27468 (delta 19195), reused 20128 (delta 13736)
Receiving objects: 100% (27468/27468), 5.74 MiB | 274.00 KiB/s, done.
Resolving deltas: 100% (19195/19195), done.
Checking connectivity... done.
==> Checking out branch master
==> ./autogen.sh
==> ./configure --prefix=/usr/local/Cellar/libsigrok/HEAD
==> make install
src/hardware/sysclk-lwla/.libs/api.o
ld: 8 duplicate symbols for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [libsigrok.la] Error 1
make: *** Waiting for unfinished jobs....
/usr/local/Library/Homebrew/build.rb:178:in `dump': can't dump anonymous class #<Class:0x007f8c0b2253c8> (TypeError)
from /usr/local/Library/Homebrew/build.rb:178:in `rescue in <main>'
from /usr/local/Library/Homebrew/build.rb:167:in `<main>'
Error: marshal data too short
Please report this bug:
https://git.io/brew-troubleshooting
/usr/local/Library/Homebrew/utils/fork.rb:39:in `load'
/usr/local/Library/Homebrew/utils/fork.rb:39:in `block (3 levels) in safe_fork'
/usr/local/Library/Homebrew/utils.rb:346:in `ignore_interrupts'
/usr/local/Library/Homebrew/utils/fork.rb:26:in `block (2 levels) in safe_fork'
/usr/local/Library/Homebrew/utils/fork.rb:7:in `open'
/usr/local/Library/Homebrew/utils/fork.rb:7:in `block in safe_fork'
/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/tmpdir.rb:88:in `mktmpdir'
/usr/local/Library/Homebrew/utils/fork.rb:6:in `safe_fork'
/usr/local/Library/Homebrew/formula_installer.rb:542:in `build'
/usr/local/Library/Homebrew/formula_installer.rb:202:in `install'
/usr/local/Library/Homebrew/cmd/install.rb:189:in `install_formula'
/usr/local/Library/Homebrew/cmd/install.rb:94:in `block in install'
/usr/local/Library/Homebrew/cmd/install.rb:94:in `each'
/usr/local/Library/Homebrew/cmd/install.rb:94:in `install'
/usr/local/Library/brew.rb:133:in `<main>'
HOPE:~ junkhack
・進めるが、Error
5) ------------------------------------------------------
HOPE:~ junkhackbrew install --HEAD libsigrokdecode
Error: Formulae found in multiple taps: * homebrew/science/libsigrokdecode
* rene-dev/sigrok/libsigrokdecode
Please use the fully-qualified name e.g. homebrew/science/libsigrokdecode to refer the formula.
HOPE:~ junkhack
・進めるが、Error
6) ------------------------------------------------------
HOPE:~ junkhackbrew install --HEAD --with-libserialport sigrok-cli
Error: Formulae found in multiple taps: * homebrew/science/sigrok-cli
* rene-dev/sigrok/sigrok-cli
Please use the fully-qualified name e.g. homebrew/science/sigrok-cli to refer the formula.
HOPE:~ junkhack
・進めるが、Error
7) ------------------------------------------------------
HOPE:~ junkhackbrew install --HEAD pulseview
Error: Formulae found in multiple taps: * homebrew/science/pulseview
* rene-dev/sigrok/pulseview
Please use the fully-qualified name e.g. homebrew/science/pulseview to refer the formula.
HOPE:~ junkhack
・進めるが、Error
8) ------------------------------------------------------
HOPE:~ junkhackbrew install sigrok-cli
Error: Formulae found in multiple taps: * homebrew/science/sigrok-cli
* rene-dev/sigrok/sigrok-cli
Please use the fully-qualified name e.g. homebrew/science/sigrok-cli to refer the formula.
HOPE:~ junkhack
Building manually の手順でやればいいのかもですが、osx のバイナリもだれか作っているはずで、探したらありました。また実機が着たらゆっくり料理することにし、今はソフトウェアの動作だけ確認しておきます。
ちょっとバージョンは古いようですが、osx でも動作するようです。
ドラッグでタイムラインの移動、マウスホイールで信号の拡大縮小できるインターフェイスです。各種信号解析も可能なようです。デジタルは8チャンネル入るようですので、これで十分用は足せそうです。DHT の温度センサーのデータ解析もあるようです。自分にはこれで十分だと思います。 サポートするハードウェアはかなりたくさんあって、迷います。とりあえず、8チャンネル取れるもので、安いものを選びました。
Open Workbench Logic Sniffer というのも、良さそうです。
その後、マニュアルビルドを試すも、libsigrok のmake で失敗。以下次回再開するときのメモ。
・Building manually
http://sigrok.org/wiki/Mac_OS_X
★Install MacPorts,
★Install Qt, download qt-mac-opensource-4.7.4.dmg
★以下必須
sudo port install boost libusb libzip libftdi0 sudo port install autoconf automake cmake glib2 python33 libtool pkgconfig
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig/
---------------------
libserialport --> OK
libsigrok --> NG
libsigrokdecode --> OK
sigrok-cli --> NG (libsigrok必須)
PulseView --> NG (libsigrokcxx>=0.4.0 必須)
---------------------
▼libserialport git clone git://sigrok.org/libserialport
cd libserialport ./autogen.sh
./configure make
sudo make install
★OK
HOPE:libserialport junkhack make
/Applications/Xcode.app/Contents/Developer/usr/bin/make all-am
CC serialport.lo
CC macosx.lo
CCLD libserialport.la
HOPE:libserialport junkhackHOPE:libserialport junkhack sudo make install
Password:
/usr/local/bin/gmkdir -p '/usr/local/lib'
/bin/sh ./libtool --silent --mode=install /usr/local/bin/ginstall -c libserialport.la '/usr/local/lib'
/usr/local/bin/gmkdir -p '/usr/local/include'
/usr/local/bin/ginstall -c -m 644 libserialport.h '/usr/local/include'
/usr/local/bin/gmkdir -p '/usr/local/lib/pkgconfig'
/usr/local/bin/ginstall -c -m 644 libserialport.pc '/usr/local/lib/pkgconfig'
HOPE:libserialport junkhack▼libsigrok git clone git://sigrok.org/libsigrok
cd libsigrok ./autogen.sh
./configure make★こける。これが入らないと進まない。
sudo make install
libsigrok configuration summary:
- Package version................. 0.4.0-git-17124cf
- Library ABI version............. 2:0:0
- Prefix.......................... /usr/local
- Building on..................... x86_64-apple-darwin13.4.0
- Building for.................... x86_64-apple-darwin13.4.0
Compile configuration:
- C compiler...................... gcc
- C compiler version.............. Apple LLVM version 6.0 (clang-600.0.57) (based on LLVM 3.5svn)
- C compiler flags................ -g -O2
- Additional C compiler flags..... -std=c99 -fvisibility=hidden
- C compiler warnings............. -Wall -Wextra -Wmissing-prototypes
- C++ compiler.................... g++
- C++ compiler version............ Apple LLVM version 6.0 (clang-600.0.57) (based on LLVM 3.5svn)
- C++ compiler flags.............. -g -O2 -std=c++11
- C++ compiler warnings........... -Wall -Wextra
Detected libraries (required):
- glib-2.0 >= 2.32.0.............. 2.44.1
- libzip >= 0.10.................. 0.11.2
Detected libraries (optional):
- libserialport >= 0.1.1.......... 0.1.1
- libftdi1 >= 1.0................. no
- libftdi >= 0.16................. 0.20
- libusb-1.0 >= 1.0.16............ 1.0.19
- librevisa >= 0.0.20130412....... no
- libgpib......................... no
- libieee1284..................... no
- check >= 0.9.4.................. no
- glibmm-2.4 >= 2.32.0............ 2.44.0
- python = 2.7.................... 2.7
- pygobject-3.0 >= 3.0.0.......... no
Enabled hardware drivers:
- agilent-dmm..................... yes
- appa-55ii....................... yes
- asix-sigma...................... yes
- atten-pps3xxx................... yes
- baylibre-acme................... no (missing: sys_timerfd_h)
- beaglelogic..................... yes
- brymen-bm86x.................... yes
- brymen-dmm...................... yes
- cem-dt-885x..................... yes
- center-3xx...................... yes
- chronovu-la..................... yes
- colead-slm...................... yes
- conrad-digi-35-cpu.............. yes
- deree-de5000.................... yes
- demo............................ yes
- fluke-dmm....................... yes
- fx2lafw......................... yes
- gmc-mh-1x-2x.................... yes
- gwinstek-gds-800................ yes
- hameg-hmo....................... yes
- hantek-dso...................... yes
- hung-chang-dso-2100............. no (missing: libieee1284)
- ikalogic-scanalogic2............ yes
- ikalogic-scanaplus.............. yes
- kecheng-kc-330b................. yes
- kern-scale...................... yes
- korad-kaxxxxp................... yes
- lascar-el-usb................... yes
- manson-hcs-3xxx................. yes
- maynuo-m97...................... yes
- mic-985xx....................... yes
- motech-lps-30x.................. yes
- norma-dmm....................... yes
- openbench-logic-sniffer......... yes
- pipistrello-ols................. yes
- rigol-ds........................ yes
- saleae-logic16.................. yes
- scpi-pps........................ yes
- serial-dmm...................... yes
- sysclk-lwla..................... yes
- teleinfo........................ yes
- testo........................... yes
- tondaj-sl-814................... yes
- uni-t-dmm....................... yes
- uni-t-ut32x..................... yes
- victor-dmm...................... yes
- yokogawa-dlm.................... yes
- zeroplus-logic-cube............. yes
Enabled SCPI backends:
- TCP............................. yes
- RPC............................. yes
- serial.......................... yes
- VISA............................ no
- GPIB............................ no
- USBTMC.......................... yes
Enabled language bindings:
- C++............................. yes
- Python.......................... no (missing: PyGObject, SWIG)
- Java............................ no (missing: SWIG, JNI headers)
HOPE:libsigrok junkhack make
/Applications/Xcode.app/Contents/Developer/usr/bin/make all-am
CC src/backend.lo
CC src/device.lo
::
CC src/hardware/zeroplus-logic-cube/api.lo
CCLD libsigrok.la
duplicate symbol _lwla1016_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/lwla1016.o
duplicate symbol _lwla1034_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/lwla1016.o
duplicate symbol _lwla1034_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/lwla1034.o
duplicate symbol _lwla1016_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/lwla1034.o
duplicate symbol _lwla1016_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/protocol.o
duplicate symbol _lwla1034_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/protocol.o
duplicate symbol _lwla1016_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/api.o
duplicate symbol _lwla1034_info in:
src/hardware/sysclk-lwla/.libs/lwla.o
src/hardware/sysclk-lwla/.libs/api.o
ld: 8 duplicate symbols for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[1]: *** [libsigrok.la] Error 1
make: *** [all] Error 2
HOPE:libsigrok junkhack▼libsigrokdecode git clone git://sigrok.org/libsigrokdecode
cd libsigrokdecode ./autogen.sh
./configure make
sudo make install
★OK
1 warning generated.
CC decoder.lo
CC instance.lo
CC log.lo
CC util.lo
CC exception.lo
CC module_sigrokdecode.lo
CC type_decoder.lo
CC type_logic.lo
CC error.lo
CC version.lo
CCLD libsigrokdecode.la
HOPE:libsigrokdecode junkhack sudo make install
/usr/local/bin/gmkdir -p '/usr/local/lib'
/bin/sh ./libtool --silent --mode=install /usr/local/bin/ginstall -c libsigrokdecode.la '/usr/local/lib'
/usr/local/bin/gmkdir -p '/usr/local/include/libsigrokdecode'
/usr/local/bin/ginstall -c -m 644 version.h '/usr/local/include/libsigrokdecode'
/usr/local/bin/gmkdir -p '/usr/local/lib/pkgconfig'
/usr/local/bin/ginstall -c -m 644 libsigrokdecode.pc '/usr/local/lib/pkgconfig'
/usr/local/bin/gmkdir -p '/usr/local/include/libsigrokdecode'
/usr/local/bin/ginstall -c -m 644 libsigrokdecode.h '/usr/local/include/libsigrokdecode'
/Applications/Xcode.app/Contents/Developer/usr/bin/make install-data-hook
/usr/local/bin/gmkdir -p /usr/local/share/libsigrokdecode/decoders
python3.4 ./tools/install-decoders \
-i ./decoders -o /usr/local/share/libsigrokdecode/decoders
Installing 59 protocol decoders:
adns5020 am230x arm_etmv3 arm_itm arm_tpiu avr_isp can dcf77 ds1307 edid
eeprom24xx guess_bitrate i2c i2cdemux i2cfilter i2s ir_nec ir_rc5 jitter jtag
jtag_stm32 lm75 lpc max7219 maxim_ds28ea00 mdio midi mlx90614 modbus mrf24j40
mxc6225xu nrf24l01 nunchuk onewire_link onewire_network pan1321 parallel pwm qi
rfm12 rgb_led_spi rtc8564 sdcard_sd sdcard_spi spdif spi spiflash stepper_motor
swd tca6408a timing tlc5620 uart usb_packet usb_power_delivery usb_request
usb_signalling xfp z80
HOPE:libsigrokdecode junkhack▼sigrok-cli git clone git://sigrok.org/sigrok-cli
cd sigrok-cli ./autogen.sh
./configure★libsigrokがないと言われる。まぁ、まだ入れてないですからね。 make
sudo make install
HOPE:sigrok-cli junkhack ./configure
checking for a BSD-compatible install... /usr/local/bin/ginstall -c
checking whether build environment is sane... yes
::
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for SIGROK_CLI... no
configure: error: Package requirements (glib-2.0 >= 2.32.0 libsigrok >= 0.4.0 libsigrokdecode >= 0.4.0) were not met:
No package 'libsigrok' found★
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables SIGROK_CLI_CFLAGS
and SIGROK_CLI_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
HOPE:sigrok-cli junkhack▼PulseView git clone git://sigrok.org/pulseview
cd pulseview cmake .★libsigrokcxx>=0.4.0 がないと
make sudo make install
HOPE:pulseview junkhackcmake .
-- Found PkgConfig: /opt/local/bin/pkg-config (found version "0.28") -- The C compiler identification is AppleClang 6.0.0.6000057
-- The CXX compiler identification is AppleClang 6.0.0.6000057
-- Check for working C compiler: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/cc
-- Check for working C compiler: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/c++
-- Check for working CXX compiler: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- checking for modules 'libsigrokcxx>=0.4.0;libsigrokdecode>=0.4.0'
-- package 'libsigrokcxx>=0.4.0' not found
CMake Error at /opt/local/share/cmake-3.3/Modules/FindPkgConfig.cmake:340 (message):
A required package was not found
Call Stack (most recent call first):
/opt/local/share/cmake-3.3/Modules/FindPkgConfig.cmake:502 (_pkg_check_modules_internal)
CMakeLists.txt:79 (pkg_check_modules)
-- Configuring incomplete, errors occurred!
See also "/Users/junkhack/Desktop/aa/tmp/pulseview/CMakeFiles/CMakeOutput.log".
HOPE:pulseview junkhack
※QT はまだ入れてない。